Getting System Information; Using The System Menu - Bose SoundTouch 220 Guia Del Usuario

Using the System menu

Use the System menu to adjust audio levels, turn on/off features (such as
AUTO OFF), change the language, set the coaxial, analog and optical inputs for
a particular source, run the ADAPTiQ
module with the console or factory reset the system.
1. Press
2. Press and
3.
Press and
4.
Press
Display
1 AUDIO COMP
2 AUDIO/VIDEO SYNC
3 HDMI CEC
4 AUTO OFF
5 SIDE AUX
6 BASS LEVEL
7 TREBLE LEVEL
on the remote.
to scroll through the System menu.
to adjust the settings.
.
System state
Off: (Default) No change to audio track.
Enhance dialogue: Increases the level of dialogue and sound
effects at low volume settings while providing full audio
impact at high volume settings.
Smart volume: Reduces the range of volume levels in a
movie soundtrack so the difference between extremely loud
outbursts and soft sounds is less noticeable.
Note: Enhance dialogue and smart volume features are not
available for SoundTouch
connected to the
Adjusts the audio delay to synchronize audio and video.
Default On: (Default) Enables CEC (see page 23).
Alternate On: Prevents unintended source switching and may
fix CEC inconsistencies (see page 34).
Off: Disables CEC.
Enable: (Default) The system powers off after 16 minutes of
inactivity (no sound coming from the system).
Disable: The system will not automatically power off.
Audio in: Sets the
Headphones: (Default) Sets the
phone output.
Note: If set to Headphones and a cable is connected, the
speakers are muted.
Disconnect your headphones when not in use.
Adjusts bass level.
Adjusts treble level.

Getting System Information

audio calibration, pair your Acoustimass
®
connector.
connector for an auxiliary source.
, Bluetooth or devices
® ®
connector as a head-
®
English - 31