Getting System Information From The Display; Understanding Messages On The Display; Using The System Menu - Bose CineMate 130 Guia Del Usuario

Getting System Information from the Display

Understanding messages on the display

The display on the front of the console allows you to access the System menu and
shows system information and icons.

Using the System menu

Use the System menu to adjust audio levels, turn on/off features (such as
AUTO OFF), change the language, set the coaxial, analog and optical inputs for a
particular source, run ADAPTiQ
or factory reset the system.
1.
Press
2.
Press and
3.
Press and
4.
Press
Display
1 AUDIO COMP
2 AUDIO/VIDEO SYNC
3 HDMI-CEC
4 AUTO OFF
5 SIDE AUX
6 BASS LEVEL
7 TREBLE LEVEL
8 CENTER LEVEL
, pair your Acoustimass
®
on the remote.
to scroll through the System menu.
to adjust the settings.
.
System state
Off: (Default) No change to audio track.
Enhance dialogue: Increases the level of dialogue and
sound effects at low volume settings while
providing full audio impact at high volume settings.
Smart volume: Reduces the range of volume levels in a
movie soundtrack so the difference between extremely
loud outbursts and soft sounds is less noticeable.
Adjusts the audio delay to synchronize audio and video.
On: (Default) Enables CEC (see page 22).
Off: Disables CEC.
Enable: (Default) The system powers off after sixteen
minutes of inactivity (no sound coming from the system).
Disable: The system will not automatically power off.
Audio in: (Default) Sets the
source.
Headphones: Sets the
input.
Note: If set to Headphones input and a cable is
Adjusts bass level.
Adjusts treble level.
Increases or decreases the level of dialogue for movies
and TV.
®
connector as a headphones
connected, the soundbar is muted.
Disconnect your headphones when not in use.
module with the console
connector for an auxiliary
English - 27