Correct Use; Device Type; Type Of Use; For Use In Potentially Explosive Areas - WALTHER PILOT GM 1030P Instrucciones De Servicio

VERSION 12/2020
OPERATING MANUAL
2

CORRECT USE

2.1

DEVICE TYPE

Manual gun for manually coating work pieces.
PILOT GM 1030P/ 1030P ADH
2.2

TYPE OF USE

The spray gun is suitable for atomizing liquid products, particularly coating products,
using the Airspray process:
– Non-ignitable products.
– Ignitable products.
WALTHER explicitly prohibits any other use!
The device may only be operated under the following conditions:
Use the device only to work with the products recommended by WALTHER.
Do not deactivate safety fixtures.
Use only WALTHER original spare parts and accessories.
The operating personnel must be trained on the basis of this operating manual.
2.3

FOR USE IN POTENTIALLY EXPLOSIVE AREAS

The device is suitable for use in potentially explosive areas as defined in
Directive 2014/34/EU (ATEX), (see Explosion protection marking Chapter 3.1).
2.4

PROCESSIBLE WORKING MATERIALS

Lacquers and paints, greases, oils and corrosion inhibitor, glue, ceramic glazes, stains.
If you want to spray working materials other than the aforementioned, contact a
WALTHER representative.
Note:
Contact your local WALTHER dealer and the lacquer manufacturer if you encounter
application problems.
2.5

MISUSE

Misuse can lead to physical injury and/or property damage!
Special attention must be paid that:
No dry coating products, e.g., powder are processed.
DOC2422648
PILOT GM 1030P
8