Cleaning And Maintenance Instructions; Daily Maintenance - Bionaire BU5000 Manual De Instrucciones

All manuals and user guides at all-guides.com
WarNiNG: DO NOT move the humidifier with water in the
tank or the humidifier base. The moving action of the water
may activate the water tank's release nozzle and overfill the
humidifier base. This may cause the humidifier to function
intermittently, or stop emitting mist. Should this occur,
simply remove the excess water from the humidifier base.
imPOrtaNt: If you do not plan to use your humidifier for
two or more days, make sure any residual water is drained
from the water tank and base to prevent any algae or
bacteria growth in stagnant water. Make sure the tank is dry.

CLeaNiNG aNd maiNteNaNCe iNstruCtiONs

Humidifiers provide comfort by adding moisture to dry,
heated indoor air. To benefit most from the humidifier
and avoid product misuse, follow all instructions carefully.
Please note that this is an electrical appliance and requires
attention when in use.
In addition, if you do not follow the recommended care
and maintenance guidelines, micro-organisms may be able
to grow in the water within the humidifier's tank. You must
routinely follow the cleaning procedures that follow in order
to ensure proper, efficient operation of your humidifier.
Proper maintenance and cleaning is essential to the
continued performance of your unit and the avoidance of
algae or bacteria build-up.

daiLy maiNteNaNCe

1. Be sure the unit is OFF and is disconnected from the
electrical outlet
2. Remove the tank from the humidifier and place in sink
or tub.
3. Drain any remaining water and rinse thoroughly to
remove any sediment or dirt. Wipe clean and dry with a
clean cloth or paper towel.
4. Refill with cool tap water. Do not overfill.
WeekLy maiNteNaNCe
to remove scale:
1. Repeat steps 1-3 above.
2. Clean the base by partially filling it with 236 ml (8-oz) of
undiluted white vinegar or by using Cleanse CleanTM
Solution (DMS216) by the manufacturer. Leave this
solution in the tank for 20
minutes, while cleaning all interior
surfaces with a soft brush.
Gently scrub the area around
the transducer with a soft brush.
Remove the scale by wiping the
entire base with a cloth dampened
with undiluted white vinegar.
5
Figure 2