Bionaire BU5000 Manual De Instrucciones página 7

All manuals and user guides at all-guides.com
3. Rinse clean with warm water to remove cleaning
solution before disinfecting the tank.
to disinfect tank
1. Fill humidifier tank 1/2 full with water and 1/2
tablespoon of chlorine bleach.
2. Let the solution stand for 20 minutes, swishing every
few minutes. Wet all surfaces.
3. Carefully empty the tank after 20 minutes, and rinse
with warm water until you can not detect any bleach
smell. Dry with a clean cloth or paper towel.
4. Refill the water tank as directed in Operating
Instructions, and turn the unit on.
freQueNtLy asked QuestiONs
QuestiONs
• What are the
variables that
affect run time?
• How do I
remove film on
water tank?
• How can I
extend the
run time?
aNsWer
The estimated run time for this
humidifier is based on average room
conditions. The actual run time of your
humidifier is dependent on numerous
variables such as:
1. Air exchange in the room where
the humidifier is placed.
2. Room construction where the
humidifier is placed.
3. Temperature of the room where
the humidifier is placed.
4. Humidity levels in the room where
the humidifier is placed.
5. Movement of occupants and the
opening and closing of doors in the
room where the humidifier is placed.
6. Home furnishings in the room
where the humidifier is placed.
See Daily Maintenance instructions.
Regular cleaning is recommended.
1. Run your unit on the lowest setting.
2. Fill the tank all the way full, place it
on the base, let the water empty
into the base until it stops bubbling,
then refill the tank full again. This
ensures maximum water capacity
and will extend run time.
6