Tabla de contenido
Idiomas disponibles
Idiomas disponibles
(1)Remove the tank cap
3. Place tank back on to the base, referring the arrow
marks to make sure the water tank is placed to
correct position. The tank will immediately begin to
release water into the water basin. See the figure
below for reference:
4. Make sure the water tank is well placed.
5. Plug the humidifier into the appropriate electrical outlet.
Control Panel
ON /
Low Mist
Standby
Control
Knob
1. Rotate the control knob clockwise from the off
position
to the position between Low
mist range to start the humidifier. The indicator
light will illuminate in green, and mist will disperse
from top after a few seconds. See below the control
panel figure for reference.
2. Adjust the control knob to select desired mist output
level. Rotate knob clockwise to increase mist output
level and counter clockwise to decrease mist level.
NOTE: High setting will produce the maximum
moisture level and Low setting will produce the
longest run time and quieter performance. When the
humidifier runs out of water, the transducer and fan
will automatically shut off.
3. To stop mist output at any setting, turn the knob
counter clockwise to the off position
4. When the humidifier runs out of water, the transducer
and fan will automatically shut off. The indicator light
will turn red. Turn the humidifier off and unplug it
from the electrical outlet.
Before refilling, empty any residual water from the
base and the tank (follow the "Daily Maintenance"
instructions). Then follow the Filling Water Tank
Instructions to refill the tank and put back into the
humidifier to begin operation.
WARNING: DO NOT move the humidifier with water
in the tank or the humidifier base. The moving action
All manuals and user guides at all-guides.com
(2) Fill with cool fresh tap water
Water Tank
Humidifier Base
Indicator Light:
Red: Low Water
Green: Normal
High
Max Mist
& High
.
(3)Replace the tank cap
of the water may activate the water tank's release
nozzle and overfill the humidifier base. This may
cause the humidifier to function intermittently, or
stop emitting mist. If this occurs, simply remove the
excess water from the humidifier base.
LED Night Light
Your humidifier is equipped with blue decorative night
light feature. Built-in night-light in humidifier base, below
the water tank base, illuminates the water with a blue
light, which can be seen through the water level view
window. The decorative light will turn on when the
control knob rotates clockwise into Low to High mist
position, and turns off when the control knob is placed
into Standby position.
NOTE: DO NOT operate the humidifier without water
Hygrometer/Thermometer
The Hygrometer/Thermometer included with your
Humidifier operates within the following specifications:
• Measuring Temperature Range: -50°C ~ +70°C
(-50°F ~ +158°F)
• Temperature Accuracy: ±1°C (±2°F)
• Selectable °C or °F Display
• Measuring Humidity Range: 10%Rh ~ 99%Rh
• Humidity Accuracy: ±5%
1. Press MIN key to display the minimum indoor
temperature and minimum indoor humidity.
2. Press MAX key again to display the maximum indoor
temperature and maximum indoor humidity.
3. Press the clear button (
MAX values.
4. Unit will show a Happy Face - Comfort (
humidity level is between 40-60%, a Sad Face - Dry (
) when humidity is below 40%, and a Neutral Face
- Wet
(
)
for any humidity level above 60%.
CLEANING AND mAINTENANCE
INSTRUCTIONS
Humidifiers provide comfort by adding moisture to
dry, heated indoor air. To get the most benefit from
the humidifier and to avoid product misuse, follow all
instructions carefully, specifically the operation, care
and maintenance guidelines. Please note this is an
electrical appliance and requires attention when in
use. Cleaning your humidifier every one or two weeks,
depending on the water conditions is important in order
to maintain efficient, healthy, odour-free operation.
Water quality varies widely and, combined with build-up
of mineral scale in your humidifier, may under certain
conditions promote the growth of micro organisms in the
water tank.
3
) to reset the stored MIN/
) when the
Tabla de contenido
