Switching The Appliance On; Operating Tips; Set The Language; Setting The Temperature Unit - Thermador T18IW Serie Manual De Uso

Switching the appliance on

Switch on the appliance with the On/Off button.
The appliance begins to cool. Light is switched on when
the door is open.
,
CAUTION:
Keep hands and fingers away from front and rear
openings of the refrigerator door when closing.
Risk of injury to hands or fingers.
Never allow children to climb on or play with
the refrigerator door.

Operating tips

When the appliance has been switched on, take several
hours until the set temperature been reached.

Set the language

The display languages can be changed according
to the table in the chapter Special functions, Setup
mode.
In order to change the display language:
1. Press setup button.
2. Press the ¾ or ¿ setting button, until the set language
is displayed.
3. Press the @ or A setting button, until the desired
language is displayed.
4. Press the setup button, in order to store the settings.
The set temperature is displayed again in the fascia.

Setting the temperature unit

The temperature can be displayed in degrees Celsius
(°C) or degrees Fahrenheit (°F).
1. Press setup button.
The first menu (temperature unit) is displayed.
2. Press the @ or A setting button in order to switch
between degrees Fahrenheit (°F) and degrees
Celsius (°C).
3. Press the setup button, in order to store the settings.
The set temperature is displayed again in the fascia.

Setting the temperature

The temperatures in both climatic zones can be set
independently of each other from +41 °F to +68 °F.
We recommend a setting of +51 °F.
1. Activate setup mode with the selection button ¿.
2. Select the required climatic zone.
3. Set the temperature with the @ (warmer) or A (cooler)
selection buttons.
Setting up the brightness of the
display
You can specify how bright the display should appear
when the door is closed.
1. Open the door.
2. Press the light switch 1 and keep it pressed.
3. Use the +/– buttons to adjust the brightness.
4. Release the light switch 1.
5. Close the door.
The display will have the specified brightness.
en-us
9