Rest Mode; Humidity Function; Alarm Function; Door Alarm - Thermador T18IW Serie Manual De Uso

Rest mode

When Rest mode is switched on, the following settings
are switched off:
Acoustic signal
■
Interior light
■
Messages on the display panel
■
The background illumination of the display panel is
■
reduced
Buttons are locked
■
Switching on
1. Press and hold down the setting button @.
2. Press Vacation button.
3. Press button @ and hold down for a further
3 seconds.
The VACATION symbol flashes on the display panel
and RESTMODE is displayed.
Switching off
Press Vacation button.
The previous settings and temperature values are once
again activated.

Humidity function

The air humidity in both climatic zones can be increased
independently of each other.
Switching on
1. Press setup button.
2. Press selection button ¿ until HUMIDITY and
the current setting (ON/OFF) are displayed for
the particular climatic zone.
3. Press the setting button @, in order to reset
the setting.
4. Press the setup button, in order to store the setting.
HUMIDITY is displayed in the display panel.
Switching off
1. Press setup button.
2. Press selection button ¿ until HUMIDITY and
the current setting (ON/OFF) are displayed for
the particular climatic zone.
3. Press the setting button A, in order to reset
the setting.
4. Press the setup button, in order to store the setting.
HUMIDITY goes out on the display panel.

Alarm function

Door alarm

The door alarm switches on if an appliance door is left
open for longer than three minutes. Close the door
to switch off the warning signal.

Temperature alarm

The temperature alarm switches on if the wine storage
compartment is too warm and the quality of the stored
wine may be impaired.
"Alarm" flashes on the display panel of the wine storage
compartment and a warning signal sounds.
When the alarm button is pressed, the warning signal
stops and the display panel indicates "alarm" without
flashing. Also the temperature display of the upper
and lower climatic zones indicates for five seconds
the warmest temperature which was reached in the wine
storage compartment.
Then this value is deleted. The temperature display
indicates the set wine storage compartment temperature
without flashing.
From this time on the warmest temperature
is recalculated and saved.
The "alarm" display goes out as soon as the set
temperature has been reached again.
The alarm may switch on without any impairment to the
stored wine:
when the appliance is switched on,
■
when a large number of wine bottles is placed
■
in the wine storage compartment,
when the appliance door is open for too long.
■

Switching off the alarm

Press the alarm button to switch off the warning signal.
en-us
11