Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Impresario Chronis io
3.
QuICK STaRT GuIdE
3.1. operating modes
3.1.1.
manual mode operation (off the wall mount)
When off its wall mount, the Impresario Chronis io remote
control is in manual mode.
This mode lets you:
•
choose a scenario
•
run the selected scenario
•
stop the current scenario
•
access the programming and setting menus
3.1.2. Running a scenario
Select the desired scenario using the arrow buttons (
a
and press (
) to run it. If you need to stop a scenario that
is running, press "Stop" (
3.2.
Information feedback
The Impresario Chronis io provides you with information on
motion in progress and confirms that all products have reached the desired positions. If a problem
occurs, the Impresario Chronis io tells you the name of the affected product and the type of fault
that has appeared. Refer to the section on "Feedback" for further details.
3.2.1.
automatic mode operation (on the wall mount)
Placing the Impresario Chronis io on its wall mount activates the automatic mode.
Programmed days and weeks can be selected using the arrow buttons (
selected sequence is accepted by the clock.
When the remote control transmitter is placed on its wall mount, the automatic mode can also be
disabled.
When a day or week is being run, the next programmed event (within the next 24 hours) is
indicated at the bottom of the screen. You can display the full make up of the current day by
pressing (
).
i
G
TIP
• Something comes up!
No need to change your programming. Simply remove the Impresario Chronis io from its mount
to halt automatic operation.
Once replaced on its mount, programmed operation will resume.
4
5015149B00_ImpresarioChronis_io.indb 4
g
).
Menu
n
)
n
). After 3 seconds, the
Copyright © 2009 Somfy SAS. All rights reserved.
30/03/10 15:01:15
Capítulos
Tabla de contenido
