Care And Maintenance; Warranty Disclaimer - Hama QI-FC15S Instrucciones De Uso

• Fold the stand (4) in or out, depending on whether you want to use it at as an inductive
charger or as a stand.
• Connect the enclosed USB-C cable with the USB-C input (1) on the inductive charger
and the USB output on the enclosed quick-charging device. When doing so, consult the
operating instructions for the USB charger.
Note
• The maximum charging current of up to 15 W is guaranteed with the enclosed
Qualcomm quick-charging device.
• An active power supply is con rmed by the status LED (2) lighting up red.
Warning
Do not use defective chargers or USB ports and do not attempt to repair them.
• Place your device with its back on the inductive charger (B).
• The charging process begins as soon as an effective induction eld has been established.
The status LED (2) lights up pulsing blue. The current charge status is displayed on your
device.
• If no induction connection can be established, change the position of your device if
necessary (B).
• The charging process ends automatically once your device's battery is fully charged. The
status LED (2) goes out.
Note
The LED display can, if required (e.g. so as not to be disturbed at night) be activated or
deactivated using the touch sensor for the LED display (3) located on the back.

5. Care and maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive
cleaning agents. Ensure that no water is able to enter the product.
Note
Disconnect the device from the mains before cleaning and during prolonged periods of
non-use.

6. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.
4