Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE
• Always make sure the multicooker is unplugged and completely cooled
down before cleaning and maintenance.
• It is strongly advised to clean the appliance after each use with a
sponge – fig.13.
Bowl, steam basket (fig.14)
• Use hot water and dishwashing soap and a sponge to clean the bowl
and the steam basket. Scouring powders and metal sponges are not
recommended.
• If food is stuck to the bottom, you may put water in the bowl to soak for
a while before washing.
• Dry the bowl carefully.
Taking care of the bowl
• For the bowl, carefully follow the instructions below:
• To ensure the maintenance of bowl quality, it is recommended not to
cut food in it.
• Make sure you put the bowl back into the multicooker.
• Use the plastic spoon provided or a wooden spoon and not a metal type
so as to avoid damaging the bowl surface – fig.15.
• To avoid any risk of corrosion, do not pour vinegar into the bowl.
• The color of the bowl surface may change after using for the first time or
after longer use. This change in color is due to the action of steam and
water and does not have any effect on the use of the multicooker, nor is it
dangerous for your health. It is perfectly safe to continue using it.
Cleaning the micro pressure valve
• When cleaning the micro-pressure valve, remove it from the lid –
and open it by rotating in the direction of "open" –
After cleaning it, wipe it dry and meet the two triangle in the two parts
together and rotate it in the direction of "close", then put it back on the
lid of the multicooker –
Cleaning and care of the other parts of the appliance
• Unplug the appliance before cleaning.
• Clean the outside of the multicooker – fig.19, the inside of the lid –
fig.14
and the cord with a damp cloth and wipe dry. Do not use abrasive
products.
• Do not use water to clean the interior of the appliance body as it could
damage the heat sensor.
17
fig.18a and
18b.
fig.16
fig.17a and
17b.
Tabla de contenido
