Getting Started Unpacking; (4.4) Replacement Blades - Evolution S355 CPSL Instrucciones Originales

could occur if the tool is tipped or if the cutting
tool is unintentionally contacted.
19. Check damaged parts. Before further
use of the tool, a guard or other part that
is damaged should be carefully checked to
determine that it will operate properly and
perform its intended function - check for
alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any
other conditions that may affect its operation.
A guard or other part that is damaged should
be properly repaired or replaced.
20. Direction of feed. Feed work into a blade
or cutter against the direction of rotation of
the blade or cutter only.
21. Never leave tool running unattended.
Turn power off. Don't leave the tool until it
comes to a complete stop.
GETTING STARTED
(4.1)
UNPACKING
Caution: This packaging contains sharp
objects. Take care when unpacking. Remove
the machine, together with the accessories
supplied from the packaging. Check carefully
to ensure that the machine is in good
condition and account for all the accessories
listed in this manual. Also make sure that all
the accessories are complete.
If any parts are found to be missing, the
machine and its accessories should be
returned together in their original packaging
to the retailer.
Do not throw the packaging away;
keep it safe throughout the guarantee
period. Dispose of the packaging in an
environmentally responsible manner.
Recycle if possible.
Do not let children play with empty plastic
bags due to the risk of suffocation.
SERIAL NO. / BATCH CODE
The serial number can be found on the motor
housing of the machine.
For instructions on how to identify the batch
code, please contact the Evolution Power
Tools helpline or go to:
www.evolutionpowertools.com
www.evolutionpowertools.com
S355CPS / S355CPSL
ITEMS SUPPLIED
Description
S355CPS or S355CPSL
Instruction Manual
14" (355mm) Mild Steel TCT Blade
Hex Key 8mm (Blade Change)
V-Block
S380CPS
Description
S380CPS
Instruction Manual
14" (355mm) Mild Steel TCT Blade
Hex Key 8mm (Blade Change)
V-Block
100mm blade flange
(for fitting 15" blades)
REPLACEMENT BLADES
(4.4)
Description
14" (355mm)
Multi-Material Cutting
TCT Blade
14" (355mm)
Diamond Blade
14" (355mm) Mild Steel
Cutting Blade
14" (355mm) Stainless
Steel Cutting Blade
14" (355mm) Thin Steel
Cutting Blade
14" (355mm)
Aluminium/ Aluminum
Cutting Blade
14" (355mm) Wood Cut-
ting Blade
15" (380mm) Mild Steel
Cutting Blade
12
Quantity
1
1
1
1
1
Quantity
1
1
1
1
1
1
Part No
(UK/EU) RAGEBLADE-
355MULTI
(USA) RAGE355BLADE
(UK/EU) RAGEBLADE-
355DIAMOND
(USA) 14BLADEDM
(UK/EU) 66TBLADE
(USA) 14BLADEST
(UK/EU) 90TBLADE
(USA) 14BLADESS
(UK/EU) EVO-
BLADE355TS
(USA) 14BLADETS
(UK/EU) 80TBLADE14
(USA) 14BLADEAL
(USA) 14BLADEWD
(USA) 15BLADEST