Ausa H Serie Manual Del Operador página 115

C200H / C200H x4 / C200HI / C200HI x4
C250H / C250H x4 / C250HI / C250HI x4
C350H / C350H x4 / C350HI / C350HI x4
Codigo de errores para los modelos que montan el motor hidráulico con sensor de
velocidad (b) (fig. 1)
Error
flash
Code
a Internal Reference Voltage failed Analog Injection
b
11
Channel Watchdog
12 Analog Injection Channel
13 Watchdog
The Battery Voltage will be monitored.
14
<9 V or > 36V is SAFE-Mode
12V System: < 9V is SAFE-Mode >16V is LIMITED-
Mode
15
24V System: < 18V or > 32V is
LIMITED-Mode
Sensor Voltage Error. Nominal 5V.
16
<4,875V or >5,125V is out of Range.
19 Pump Coil Wiring crossed
21 Pump Forward and Reverse Control Valve Error
Pump Forward Control Valve Error
22
Feedback Error / Valve Resistance out of Range
Pump Forward Control Valve Error
23
Feedback Error / Valve Resistance out of Range
Digital Outputs A1 (PSCp03) / A2 (PSC2p04)
25
Feedback Error
Digital Outputs B1 (CC2p10) / B2 (CC2p09)
26
Feedback Error
Motor Control Valve Error
28
Feedback Error / Valve Resistance out of Range
Motor Brake Pressure Defeat Valve
29
Feedback Error
Engine/pump Speed RPM Error / Input Frequency
31 >10.000 Hz / >8000 rpm / Pump rpm < lowest
allowed engine/pump rpm
35 FNR Shortcut Error
39 Inch Sensor Error
41 Inch Sensor not calibrated
43 Driving Sensor Error
Mode Switch-B Error
47
Inputs not inverse to each other
51 Swashplate Angle Error
58 Motor RPM Error / Input Frequency >8.000 Hz
59 Motor Direction Error
71 CAN Hardware Error
72 CAN RX Message timeout
75 Engine Speed Pot Error
77 Cruise Control Command Error
79 Pressure Sensor Error
98 CAN Shared Engine Speed Control
100 Parameter Error
Description
113
Action Reference Page
SAFE-Mode Internal
SAFE-Mode
SAFE-Mode
SAFE-Mode Software
LIMITED-Mode
SAFE-Mode
SAFE-Mode
Mechanical or
SAFE-Mode Valve Output
Overview
LIMITED-Mode
LIMITED-Mode
SAFE-Mode Electrical Outputs
SAFE-Mode
LIMITED-Mode
LIMITED-Mode
LIMITED-Mode Electrical Inputs
SAFE-Mode
SAFE-Mode Pedal Calibration
Start Protection
ON
LIMITED-Mode
LIMITED-Mode Electrical Inputs
LIMITED-Mode Swashplate Control
LIMITED-Mode Electrical Inputs
LIMITED-Mode
Log Functions –
LIMITED-Mode
CAN Screens
LIMITED-Mode
LIMITED-Mode Electrical Inputs
LIMITED-Mode
LIMITED-Mode
Log Functions –
SAFE-Mode
CAN Screens
No action