avdel 07287 Manual De Instrucciones página 43

S e r v i c i n g t h e To o l
P r e s s u r e R e g u l a t o r a n d F i l t e r A s s e m b l y
•
To remove the Pressure Regulator and Filter Assembly 45 from the cabinet, disconnect the two Air Hoses 59 and 63 at the
regulator.
•
Remove the two screws, spacers, washers and nuts securing the regulator to the cabinet.
•
Remove assembly from the cabinet.
•
Replacement is in reverse order of removal.
The pressure regulator must not be adjusted under any circumstances.
A i r P r e s s u r e I n d i c a t o r A s s e m b l y
•
To remove the Air Pressure Indicator Assembly 53, remove the air hose from the rear of the gauge.
•
Remove the clamp from the rear of the gauge and withdraw gauge from front of the cabinet.
•
Replacement is in reverse order of removal.
•
After any dismantling/assembling has occurred, the system MUST be primed.
Item numbers in bold refer to the General Assembly drawing and Parts List on pages 18-19.
I M P O R T A N T
The pressure regulator in the cabinet is set to 5.25 bar.
I M P O R T A N T
The safety valve in the cabinet is set to 5.25 - 5.30 bar.
The safety valve must not be adjusted under any circumstances.
15