Controls And Functions - Samson Auro D1200 Manual Del Usuario

Controls and Functions

2
1. LINE INPUTS (A and B) - The D1200 features balanced XLR/¼" stereo line in-
puts. The left (A) and right (B) input signals are mixed together before they are
routed to the internal amplifier.
2. THRU Outputs (A and B) - Full range male XLR stereo line outputs. These outputs
can be used to connect another subwoofer, or send full range signal to your
main PA loudspeakers.
3. GAIN Control - This control adjusts the overall signal level at the input of the in-
ternal power amplifier. This control does not affect the signal sent to the THRU
outputs.
4. SIGNAL Indicator - The green SIGNAL LED lights whenever signal is present at
the D1200's inputs.
5. LIMITER Indicator - This yellow LED lights when the amp is near the clipping
point and the limiter is engaged. If the LIMITER indicator lights frequently,
turn down the GAIN control on the Auro subwoofer or turn down the signal at
the source, until the indicator does not light anymore, or lights only occasion-
ally with high signal peaks.
6. PROTECT Indicator - This LED lights RED when the amp overheats or other
problems have been detected. If the PROTECT indicator lights due to the level
being too high, the amplifier will limit the audio and lower the output level.
Turn the GAIN control down until the PROTECT indicator is no longer lit. When
the unit cools, the amplifier will raise the level back up.
Auro D1200 Active Subwoofer
1
3
6
5
4
10
11
7
11