Flash Modes; Self-Timer; Power Save Feature - Olympus FE-150 Manual Del Usuario

1
Press Y# repeatedly to select the flash mode and press i.
2
Press the shutter button halfway.
When the flash is set to fire, the # mark lights.
3
Press the shutter button completely to take the picture.
Flash working range:
W (max.):Approx. 4.0 m (13.1 ft.)
T (max.): Approx. 2.5 m (8.2 ft.)
Icon Flash Mode
No Auto flash
indication
Red-eye
!
reduction flash
#
Fill-in flash
$
Flash off
1
Press NY to select [Y ON] and press i.
2
Press the shutter button fully to take the picture.
The self-timer lamp lights for approximately 10
seconds after the shutter button is pressed, then starts
blinking. After blinking for approximately 2 seconds,
the picture is taken.

Power Save Feature

To save battery power, the camera automatically enters sleep mode and stops
operating if not used for approximately 3 minutes. Operate the shutter button or
zoom button to reactivate the camera.
If the camera is not operated for approximately 15 minutes after the camera enters
sleep mode, it automatically retracts the lens and turns off. To resume operation,
turn on the power again.

Flash Modes

The flash fires automatically in low light or backlight
conditions.
The red-eye reduction flash mode significantly reduces this
phenomenon by emitting pre-flashes before firing the
regular flash.
The flash fires regardless of the available light.
The flash does not fire even in low light conditions.

Self-Timer

Description
En
Self-Timer Lamp
13