Care And Handling Of The Pulse Oximeter; Cleaning Or Disinfecting The Pulse Oximeter - Smiths Medical BCI Pulse Manual De Instrucciones

Chapter 4: Operating Instructions
5. To turn on the pulse oximeter, press the
at the fingertip of the device. When turned
ON, the device's monitor software revision is
temporarily displayed.
WARNING: Verify that all LEDs (light emitting
diodes) light up upon startup of the device.

Care and Handling of the Pulse Oximeter

WARNING: Misuse or improper handling of the
pulse oximeter could result in damage to the
device. This may cause inaccurate readings.
NOTE: Obstructions or dirt on the pulse oximeter's
red light or detector may cause the checks to
fail. Make sure there are no obstructions and the
device is clean.

Cleaning or Disinfecting the Pulse Oximeter

Clean or disinfect the pulse oximeter before
attaching to a new patient.
CAUTION: Do not autoclave, ethylene oxide
sterilize, or immerse the pulse oximeter in
liquid.
Clean the pulse oximeter with a soft cloth
moistened in water or a mild soap solution. To
disinfect the pulse oximeter, wipe it with isopropyl
alcohol.
20 Finger Oximeter Operation Manual
O
key