Safety Instructions; Safety Labels - Shindaiwa M230 Manual Del Operador

Safety Instructions

WARNING!
Never operate
power equipment of any
kind if you are tired or if you are under
the influence of alcohol, drugs, medi-
cation or any other substance that
could affect your ability or judgement.
ALWAYS wear eye protection to shield
against thrown objects.
ALWAYS wear hearing protection
devices when operating this unit.
NEVER operate the engine when
transporting the unit. Make sure cutter
safety guards are in place when trans-
porting this unit.
NEVER operate the engine indoors!
Make sure there is always good ventila-
tion. Fumes from engine exhaust can
cause serious injury or death.
ALWAYS make sure there are no missing
or loose fasteners and that the stop switch
and throttle controls are working properly.
ALWAYS use the proper cutting tool for
the job.

Safety Labels

Figure 1
Work Safely
Attachments for the Multipurpose Tool
Carrier operate at very high speeds
and can do serious damage or injury if
they are misused or abused. Never allow
a person without training or instruction to
operate this unit!
Stay Alert
You must be physically and mentally fit to
operate this unit safely.
WARNING!
Use Good Judgement
ALWAYS clear your work area of trash
or hidden debris that could be thrown
back at you or toward a bystander
ALWAYS make sure the cutting attach-
ment tool is properly installed and
firmly tightened before operation.
NEVER use a cracked or warped
cutting attachment: replace it with a
serviceable one and make sure it fits
properly.
ALWAYS stop the engine immediately
if it suddenly begins to vibrate or shake.
Inspect for broken, missing or improperly
installed parts or attachments.
ALWAYS keep the unit as clean as
practical. Keep it free of loose vegeta-
tion, mud, etc.
WARNING!
Never make unauthorized
attachment installations. Do not
use attachments not approved by
Shindaiwa for use on this unit.
NEVER extend trimming line beyond
the length specified for your unit.
ALWAYS hold the unit firmly with both
hands when cutting or trimming, and
maintain control at all times.
ALWAYS keep the handles clean.
ALWAYS disconnect the spark plug wire
before performing any maintenance work.
BEFORE starting the engine make
sure the cutting attachment is not con-
tacting anything.
ALWAYS stop the engine immediately
and check for damage if you strike a
foreign object or if the unit becomes
tangled. Do not operate with broken or
damaged equipment.
M230
IMPORTANT!
Safety and Operation Information Labels:
Make sure all information labels are
undamaged and readable. Immediately
replace damaged or missing information
labels. New labels are available from your
local authorized Shindaiwa dealer.
3