Energy Saver - JENN-AIR PROSTYLE 30 Manual Del Usuario

S
ETUP
Tones (beeps)
The number of beeps heard at the end of cooking and at the
end of timer operation and their volume can be adjusted.
To adjust the beeps:
1. Press Setup pad.
2. Use the down arrow to scroll down.
3. Select Tones using the Quickset pads.
To change the beeps at the end of cooking:
1. Select Cook.
2. Select 1-30 to hear one beep every thirty seconds OR
Select 1-60 to hear one beep every sixty seconds OR
Select 1 Beep to hear one beep only at the end of cooking.
3. Select Set.
4. Press the Setup pad to exit.
To change the timer beeps:
1. Select Timers.
2. Select 2-30 to hear two beeps every thirty seconds OR
Select 2-60 to hear two beeps every sixty seconds OR
Select 1 Beep to hear one beep only at the end of the set
time.
3. Select Set.
4. Press the Setup pad to exit.
To change the volume of the beeps:
1. Use the down arrow to scroll to the next screen.
2. Select Volume.
3. Select High-3 for the highest volume OR
Select Med-2 for medium volume OR
Select Low-1 for the lowest volume.
4. Select Set.
5. Press the Setup pad to exit.
12 Hr Shutoff
The oven will automatically turn off at the end of 12 hours if
you accidentally leave it on.
To turn off this feature:
1. Press Setup pad.
2. Use the down arrow to scroll through the screens to 12
Hour Shutoff.
3. Select On or Off using the Quickset pads.
4. Select Set.
5. Press the Setup pad to exit.
Timer Format
The display format for the timer can be set from HRS/MIN
(hours and minutes) to MIN/SEC (minutes/seconds).
To change the timer format display:
1. Press Setup pad.
2. Use the down arrow to scroll down through the screens.
3. Select Timer Format.
4. Select HRS/MIN or MIN/SEC using the Quickset pads
5. Select Set.
6. Press the Setup pad to exit.

Energy Saver

To save energy, the display can be set to turn off if it has not
been used for five minutes.
To set the Energy Saver feature:
1. Press Setup pad.
2. Use the down arrow to scroll through the screens.
3. Select Energy Saver.
4. Select Off or On using the Quickset pads.
5. Select Set.
6. Press the Setup pad to exit.
Press any pad to "wake up" the display.
Demo
When Demo is selected, you will see a short presentation
highlighting the features of your new Jenn-Air wall oven.
1. Press Setup pad.
2. Use the down arrow to scroll down.
3. Select Demo.
4. Press the Setup pad to exit.
22