Tabla de contenido
Idiomas disponibles
Idiomas disponibles
A-14 / ENGLISH
PRE-OPERATIONAL CHECKLIST
Before Each Use:
*
Inspect the machine for damage or oil and water leaks.
*
Check the hydraulic oil level (27).
*
Make sure the recovery tank is empty.
*
Make sure the battery charger is not connected to the machine.
*
Check battery charge condition.
In the Driver's Seat:
*
Be sure that you understand the operating controls and their functions.
*
Adjust the seat to allow easy reach of all controls.
*
Insert the Master Key and turn the Ignition Key Switch (CC) to the ON position. Check for proper operation of the Horn (B), Hour Meter
(BB) and Headlights (14). Turn the Ignition Key Switch (CC) OFF.
*
Check the Parking Brake Latch (OO). The latch must hold its (locked parked) setting fi rmly with out easily being released.
(Report all defects immediately to service personnel).
Plan Your Cleaning in Advance:
*
Presweep heavily littered areas for more effi cient operation.
*
Arrange long runs with a minimum of stopping or starting.
*
Allow 6 inches of broom path overlap to ensure complete coverage.
*
Avoid making sharp turns, bumping into posts, or scraping the side of the machine.
MAIN BROOM
Several different main brooms are available for this machine. Contact your Nilfi sk-Advance dealer if you need help selecting the best broom
for the surface and litter that you will be sweeping. NOTE: Reference broom maintenance for installation steps.
SCRUB BRUSH INSTALLATION
1
Make sure the Key Switch (CC) is off (O). See Figure 3. Remove side skirt assemblies for easier access. NOTE: Loosen large Black
Knob (A) at the front of each skirt mounting bracket, slide the skirt assembly forward and lift straight UP and off scrub deck.
2
To mount the brushes (or pad holders) align the lugs on the brush with the holes on the mounting plate and turn to lock in place
according to rotation directions shown in Figure 4.
A-14 - FORM NO. 56041577 - Captor
4300B, 4800B / CR 1100B, 1200B
™
Capítulos
Tabla de contenido
