Test Operation - GE GES-NJGB25IN-1 Manual Del Propietario E Instrucciones De Instalación

Ocultar thumbs Ver también para GES-NJGB25IN-1:
Tabla de contenido
Operation
SMART Operation
(This function is unavailable on
some models)
One key can give you a
comfortable room!
AUTO
FAN SPEED
The air conditioning unit can
AUTO
AUTO
judge the indoor temperature,
and make the adjustment
accordingl y.
QUIET
COOL
TEMP
FAN
HEAT
TEMP
SMART
DRY
SWING
FAN
HEALTH
AIRFLOW
MODE
Press ON/OFF button, unit starts.
SLEEP
POWER
CODE
Press SMA R T button "
LIGHT
TIMER
LOCK
displayed on the remote controller.
CONFIRM
/CANCEL
SMA R T FRESH
SMA R T Defrost
SMA R T FAN SPEED
SMA R T FAN HEA LTH
SMA R T D R Y
SMA R T SOFT
SMA R T Control temperature
or
SMA R T stops
Under the cooling, heating and dehumidifying mode,
press the smart key to enter the smart function. Under
the smart running mode, when the air conditioning is
running, it will automatically select cooling, heating,
dehumidifying or blowing mode as When the smart
function is running, press the "cooling" "heating" or
"dehumidifying" key to switch to the other mode, you
will exit from the smart function.
SMA R T start
SMA R T
" is
ON/OFF operation and test operation
RISK OF ELECTRIC SHOCK.
Do not operate the ON/OFF switch with a wet hand.
ON/OF F Operation:
Use this operation only when the remote controller is
defective or lost, and with function of emergency running,
air conditoner can run automatically for a while.
When the emergency operation switch is pressed, the
"Pi" sound is heard once, which means the start of this
operation.
emergency operation starts, the unit will run automatically in
the following modes:
Room
Designated
T imer
temperature
temperature
mode
Above 2 4 ºC
24 ºC
No
Below 2 4 ºC
24 ºC
No
It is impossible to change the settings of temp. and fan
speed, It is al so not possible to operate in timer or dry mode.

Test operation:

est operation switch is the same as emergency switch.
T
Use this switch in the test operation
when the room temperature is below
16 ºC, do not use it in the normal
operation.
Continue to press the test operation
switch for more than 5 seconds.
After you hear the "Pi" sound twice,
10
Fan
Operation
speed
mode
AU T O
COOL
AU T O
HE AT
P i Pi
Pi
Tabla de contenido
loading

Tabla de contenido