Numbering Machine - Reiner jetStamp graphic 970 Manual De Instrucciones

jetStamp graphic 970

2.5. Numbering machine

2.5.1. Numbering machine
Generates a numbering machine object.
Object can be placed precisely according to the grid.
The maximum number of numbering machine objects for the 4 print patterns
is limited to 5.
Right-click on object
Numbering
machine
Link to the
number circle:
Numbering ma-
chine format:
Delete object:
58
The current numbering machine number (1 - 5) is displayed in
numbering machine
Lines the selected numbering machine to a present number circle.
The link synchronises the count of several numbering machines.
Each print process of a linked numbering machine updates the shared
counter reading.
Example:
Line 1: numbering machine 1, link to number circle 1, (step width 1)
Line 2: numbering machine 2, link to number circle 1, (step width 1)
Line 3: numbering machine 3, link to number circle 1, (step width 1)
Line 4: numbering machine 4, link to number circle 1, (step width 1)
In the example, the counter is increased by step 1 for each print.
Printing lines 1 to 4 once each therefore sets the counter to 4.
The numbering machine of the next print receives the counter number
5, etc.
The counting steps of the numbering machines can also be set differently
(see Format - Numbering machine).
NOTE: Numbering machines that are all linked to the same number circle
must not be placed in the same print line..
To change the numbering machine format
(see Format - Numbering machine)
Delete object.