Sony DR-210DP Manual De Instrucciones
Sony DR-210DP Manual De Instrucciones

Sony DR-210DP Manual De Instrucciones

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Stereo
Headset
DR-210DP
©2011 Sony Corporation
Printed in Thailand
Microphone
Wind screen
4-106-656-31(1)
Operating Instructions
Manual de instrucciones
To microphone jack (pink)
To headphone jack (black)
Microphone arm
English
Stereo headset
Features
 Light weight design for long lasting wearing comfort.
 Flexible microphone designed to minimize surrounding noise.
 Single sided cord.
Supported PC models
 IBM PC/AT or compatible computer with a microphone input jack and a sound
output jack, or a computer with a built-in sound card.
 It is required that the sound card has a power supply for the microphone.
 It is required that the microphone input jack and sound output jack are lined up
together.
 This is not compatible with Macintosh computers.
How to use
1
Connect the headphone plug (black) to the headphone jack and connect the
microphone plug (pink) to the microphone jack (see fig.  ).
2
Adjust the length of the headband so that the headset fits on your ear.
3
Position the small holes of the microphone in front of your mouth by turning
the microphone arm (see fig.  ).
About the wind screen
Use the supplied wind screen on the microphone to reduce wind noise.
Note
Handle with care when attaching the wind screen to the microphone. It may be torn by excessive force.
Cord Slider
Specifications
Cord: Approx. 2.5 m (8 ft.
/
in.) / Plug: Gold-plated stereo mini plug (for headphone
1
4
plug), Gold-plated mini plug (for microphone plug) / Mass: Approx. 58 g (2.05 oz.)
(without cord)
<Receiver>
Type: Open air, dynamic / Driver unit: 30 mm (CCAW Voice Coil), dome type /
Power handling capacity: 1,000 mW (IEC*) / Impedance: 24 Ω at 1 kHz /
Sensitivity: 100 dB/mW / Frequency response: 40 – 20,000 Hz
<Microphone>
Design: Flexible boom microphone / Type: Electret condenser / Open circuit voltage
level: –40 dB (0 dB = 1 V/Pa) / Effective frequency range: 20 – 20,000 Hz
<Supplied accessories>
Wind screen (1)
Operating Instructions (1)
* IEC = International Electrotechnical Commission
Design and specifications are subject to change without notice.
Precautions
 Be careful not to use the headset at too loud a volume level. Otherwise, you may have
audio feedback (a howling effect) as the microphone picks up the loud sound from the
headphone unit.
 Listening with the headset at high volume may affect your hearing. For traffic safety,
do not use while driving or cycling.
 Do not put weight or pressure on the headset as it may cause the headset to deform
during long storage.
 The earpads and wind screen may deteriorate due to long term storage or use.
 Do not pull the cord slider in the direction of the plugs forcibly. It may cause the wire
to break.
The validity of the CE marking is restricted to only those countries when it is legally
enforced, mainly in the countries EEA (European Economic Area).
loading

Resumen de contenidos para Sony DR-210DP

  • Página 1  This is not compatible with Macintosh computers. DR-210DP How to use ©2011 Sony Corporation Printed in Thailand Connect the headphone plug (black) to the headphone jack and connect the microphone plug (pink) to the microphone jack (see fig.  ). Adjust the length of the headband so that the headset fits on your ear.
  • Página 2  Español Auriculares estéreo Micrófono Características A la toma de micrófono (rosa)  Diseño ligero para una comodidad duradera al llevarlos.  Micrófono flexible para minimizar el ruido del entorno.  Un único cable lateral. A la toma de auriculares (negra) Modelos de PC compatibles  Computadora IBM PC/AT o compatible con una toma de entrada de micrófono y una toma de salida de audio, o una computadora con tarjeta de sonido incorporada.  Es necesario que la tarjeta de sonido disponga de suministro de alimentación para el  micrófono. ...