Novoferm NovoSeal S450 Instrucciones De Montaje página 19

6. Installation
6.16
EN
2
1
Outside view
Connecting the side elements and roof cover:
The expander cords that were previously attached to the wall-side roof profile are now guided over the side elements to the outside and
threaded through the eyelets at the bottom of the shackles on the side element. Next, the cords are inserted from the outside through the
opening in the roof cover above and secured in place by tying a knot.
Make sure that the expander cord is slightly under tension. Now cut off any excess length of expander cord. Bend back the material at each
end of the rain gutter to give the profile greater stability and form a more effective drip guide.
General instruction: The image may differ at detail level.
17
This installation manual must be given to the customer and kept safely during the entire period of use!