Warning Symbols; Machine Symbols - Garland BEST 310 DPG Manual De Instrucciones

English

3. WARNING SYMBOLS

Warning labels indicate required information for the
use of the machine.
Warning and care.
Do not let people enter in the work area.
This area will be of a diameter of 15
meters from the point in which you are
working.
Use protective non skid boots with
protective steel.
Use appropriate security gloves.
It is necessary to use eye and acoustic
protection at any time.
It is necessary to read this manual
carefully before using this machine.
Attention!, Danger!: The cutting tool can
project hard objects.
Attention!: Do not touch the cutting blade.
Caution! Hot Surface.
Never use only fuel or fuel in a bad
state. Mix unleaded fuel grade 95
and totally synthetic oil for 2 stroke
engines to 2.5% (40:1).
Maximum tool rotation speed.
-1
XXXX min .

4. MACHINE SYMBOLS

In order to ensure safe operation and maintenance of
the machine are the following symbols in the machine.
DeFuel tank. Located in the combustible
tank cap. Mix 2 stroke oil and gasoline.
Air positions:
Open = Normal operating position.
Located in the top of the filter.
Open = Normal operating position.
Located in the top of the filter.
Position for starting the machine in cold.
Located on the of air filter cover.
Position for starting the machine in cold.
Located on the of air filter cover.
Positions start switch located on the right
handle of the machine.
"O" = Off (The machine don´t work)
"I"= On (The machine is ready to work)
Sense of rotation.
28/132