GB
GB
Dear customer,
We thank you that you have bought ECHEDO stove, thus having shown your confidence in VIADRUS brand. Your new stove was manufactured
in a company that is a holder of ISO 9001:2000 certification.
Before installation and commissioning, please carefully acquaintance with the instruction manual for your new stove. It will help you to avoid
possible problems incurred as a result of violation of guidance and instructions specified in this manual, which can – under certain
circumstances – lead to a damage of the stove. Save this manual for searching other information in the future.
1
Stove use and advantages
The ECHEDO stove serves as a secondary source of heat for heating of swelling and commercial premises. The stove are only determined for
combustion of lump wood or pressed wooded briquettes. Combustion of other matters, for example, plastics, putlogs, sawdust, liquid fuels,
wastes or other combinations is prohibited.
2
Stove technical description
It is a stove assembled from quality steel
plates. The stove furnace is equipped
with a cast-iron fire grate. The stove door
is equipped with a heat-resistant glass,
and its structure allows opening in the
horizontal direction to the left. A part of
the stove is a removable ash-pan. The
stove surface is protected by heat-
resistant painting with the resistance up
to 650°C (heating chamber) and 350°C
(other steel-plate parts – the door, the
rear cover, the heating chamber cover,
etc.).
Tab. №. 1
Main thermo-technical parameters
Total high (mm)
Width (mm)
Depth (mm)
Dead weight (kg)
Neck - chimney (mm)
Neck – air supply (mm)
Min. operation chimney draught (Pa)
Efficiency (%)
Nominal output (kW)
Fuel consumption (kg/h)
Average combustion products temperature behind the neck (°C)
Combustion products' mass flow rate (g/s)
Content of CO at 13% O
(%)
2
STEEL PLATE ACCESSORIES
FURNACE DOOR
Fig. №. 1
Main parts of the stove
50
REGULATION
ASH-PAN
10-15
0,8 ~ 2,2
0,067
COVER
FURNACE COVER
FUME
SMALL
CHIMNEY
COMBUSTION
CHAMBER
1111
540
470
163
147
100
80,2
7
290
5,8