Functional Description; General Power Tool Safety Warnings; Impact Wrench Safety Warnings - Makita TW1000 Manual De Instrucciones

ENGLISH
(Original instructions)
1 Switch trigger
2 Side grip
3 Groove
4 Socket
5 Anvil
SPECIFICATIONS
Model
Capacities
Standard bolt .............................................. M22 – M30
High tensile bolt .......................................... M22 – M24
Square drive ...................................................... 25.4 mm
–1
No load speed (min ) ............................................ 1,400
Impacts per minute ................................................. 1,500
Max. fastening torque ..................................... 1,000 N•m
Overall length ..................................................... 382 mm
Net weight .............................................................. 8.8 kg
Safety class ...............................................................
• Due to our continuing program of research and devel- opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Intended use
The tool is intended for fastening bolts and nuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.

General Power Tool Safety Warnings

WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.

IMPACT WRENCH SAFETY WARNINGS

1. Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
fastener may contact hidden wiring or its own
cord. Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
2. Wear ear protectors.
3. Check the impact socket carefully for wear,
cracks or damage before installation.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
4
Explanation of general view
6 O-ring
7 Pin
8 High tensile bolt
9 Fastening torque
10 Fastening time
6.
TW1000
7.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
/II
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.

FUNCTIONAL DESCRIPTION

CAUTION:
ENE036-1
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
ENF002-2
Switch action (Fig. 1)
CAUTION:
• Before plugging in the tool, always check to see that
the switch trigger actuates properly and returns to the
"OFF" position when released.
• Change the direction of rotation only when the tool
comes to a complete stop. Changing it before the tool
GEA010-2
stops may damage the tool.
The switch is reversible, providing either clockwise or
counterclockwise rotation. To start the tool, simply pull
the lower part (A) of the switch trigger for clockwise or the
upper part (B) for counterclockwise. Release the switch
trigger to stop.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing side grip (auxiliary handle) (Fig. 2)
GEB134-1
Fit the side grip into the groove on the hammer case and
fasten securely.
The grooves for the side grip installation are located in
two positions. Install it at the proper position according to
your work.
Selecting correct socket
Always use the correct size socket for bolts and nuts. An
incorrect size socket will result in inaccurate and incon-
sistent fastening torque and/or damage to the bolt or nut.
11 Limit mark
12 Protector
13 Brush holder cap
14 Screwdriver
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
The proper fastening torque may differ depend-
ing upon the kind or size of the bolt. Check the
torque with a torque wrench.