Using the image stabiliser
The image stabiliser helps you to take better photos
when lighting conditions are poor. It reduces the risk of
camera shake.
Select "Stabiliser" from the camera menu and
switch the function on or off as required.
Using the fl ash
If it is too dark to take a photo, the on-board fl ash can
provide the additional light required.
Press the fl ash button repeatedly to select the follo-
wing fl ash settings:
AUTO: The fl ash is automatically enabled if
shooting conditions require additional
lighting.
Flash is triggered before the actual fl ash;
used to prevent "red-eye" effect. The ca-
mera detects the brightness and only fl as-
hes if necessary.
Flash always on
"Slow Sync": The fl ash is synchronised
with slow shutter speed.
Flash always off
EN
33