Powermate PWFTA17322 Manual Del Operador página 17

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Maintenance
• Save all instructions
How to Change the Oil
NOTE: Refer to Figure 11 when following the steps below:
1. Stop the engine and allow it to cool.
2. Disconnect spark plug wire from the spark plug.
3. Remove oil dipstick. (See Figure11)
4. Tilt engine and allow all of oil to drain into a collection pan.
IMPORTANT: Used oil is a hazardous waste. Place oil in a sealed container and take to your local recycling center. Do NOT
discard with household waste.
5. To re-fill engine with oil, see engine preparation section "How to Check Oil and Fill to Proper Level".
How to Clean the Air Filter
A dirty air filter will restrict air intake. Periodic maintenance
of the air filter will help improve engine performance and
reduce emissions.
WARNING
Never clean air filter with gasoline or an easy ignited solvent
because it may create a fire hazard.
1. Remove the air filter cover, and carefully remove the filter
element. (See Figure 14)
2. Clean all parts. Clean filter element by gently tapping it
on a flat surface. Replace if very dirty.
3. Reinstall the filter element and air filter cover.
Questions? Call Toll Free at 1-800-737-2112
(Continued)
Filter Element
EN - 16
Copyright © 2018 MAT Engine Technologies, LLC
Air Filter Cover
Figure 14
Tabla de contenido
loading

Tabla de contenido