Operation - Powermate PWFTA17322 Manual Del Operador

Operation

• Save all instructions
A
Before Starting the Engine
WARNING
Before starting engine, read operator's manual. Become
familiar with location and function of all controls. Know how
to stop the engine quickly.
Before attempting to start the engine, review the
following steps:
1. Unit has been assembled according to all
assembly instructions.
2. Unit has been inspected for any damaged or
missing components.
3. No parts are remaining in the carton.
4. Engine oil is at proper level.
5. Fresh, clean, regular-unleaded gasoline has been
added to fuel tank.
6. Spark plug wire is connected to spark plug.
7. Trimmer has been moved to desired location.
8. Trimmer is on level surface.
B
How to Start the Engine
WARNING
Debris thrown from Trimmer can cause severe eye
damage. Always wear ANSI compliant safety glasses
or eye shields when operating trimmer. If you wear
eyeglasses, put an OSHA certified Wide Vision Safety
Mask over your eyeglasses.
NOTICE
Before starting Trimmer, clean debris from holes in the recoil
starter cover.
1. Review ALL steps in the "BEFORE STARTING THE
ENGINE" section.
2. Push the Primer Bulb 3 times, waiting 2 seconds
between each push. (See Figure 12)
NOTE: Prime only as required when re-starting a warm
engine.
Questions? Call Toll Free at 1-800-737-2112
WARNING
Keep all bystanders, especially CHILDREN, away
during operation.
IMPORTANT: This unit's engine exhaust system is equipped
with a spark-arresting muffler. Tampering with or removing
the spark-arrestor violates section 4442 of the California
Public Resources Code as well as other applicable state
and federal law.
DANGER
Never run engine indoors or in a poorly ventilated area.
Engine exhaust contains Carbon Monoxide, an ODORLESS
and DEADLY gas.
Primer
Button
EN - 11
Copyright © 2018 MAT Engine Technologies, LLC
Figure 12