Siemens Gigaset 3000 Instrucciones De Manejo página 15

Introduction
Introduction
Socket
for
power
lead
14
Your Gigaset Repeater extends the reception range of a
maximum of 2 handsets. Up to 6 Gigaset Repeater units
can be used with a single base station thus making avail-
able extra extended reception range for each 2 handsets
respectively.
The maximum number of handsets that can be registered
at your base station is not affected by the Gigaset
Repeater.
Gigaset Repeater
Example with 2 Gigaset Repeaters
Beispiel mit 2 Gigaset Repeatern
Before you start to register the units, install the Gigaset
Repeater in close proximity to the base station and a pow-
er supply point. If a Gigaset Repeater is already in use, it
must be switched on and positioned next to the base
station before registration can commence.
The power lead supplied is plugged into the socket on the
Gigaset Repeater's rear side. Using the specified mea-
surements, drill the necessary holes in the wall to mount
the device using the screws and plugs supplied.
The different operating modes are indicated on the front
of the Repeater unit by means of two LED's (for an expla-
nation, see page 18).
LED's
Gigaset Repeater
s
Gig as
et
Re pea
ter
Base station
s
Gig as
et
Re pea
ter
Zusätzliche Empfangsbereiche
Additional reception ranges with
Gigaset Repeater durch Gigaset Repeater