Aqua Medic EcoDrift 4.3 Manual De Instrucciones página 9

Fig. 2: EcoDrift x.3 Control
1. WiFi
2. MODE/FEED
3. Display
4. Arrow keys
5. Pulse frequency controller
6. 24 V-connection
7. 0-10 V connection for external control options
8. Pump connection
WiFi button (Fig. 2, No. 1): WiFi mode and Master, Slave or Stand Alone-operation.
MODE/FEED (Fig. 2, No. 2): By pressing the button briefly, you can switch from one program mode to the next.
If you press the MODE / FEED button for 5 seconds, a pause symbol (fish) lights up in the display. The pump
stops for 10 minutes and then starts again. If you want to start it earlier, press the MODE / FEED button again
for 5 seconds.
Arrow keys (Fig. 2, No. 4): The power can be continuously adjusted between 30 and 100%.
LOW/HIGH (Fig. 2, No. 5): By those keys the pulse frequency can be adjusted.
0-10 V connection: If the plug of a 0-10 V control cable is plugged in there (item No. 100.302), the controller
switches automatically and the pump can be controlled via an external 0-10 V control unit.
Fig. 3: Controller's display
1. Pump power
2. WiFi-operation
3. Master – Slave – Stand Alone-operation
4. Pump power
5. – 9. Pump mode
9