Casio GzOne Ravine 2 Guia Del Usuario página 54

2. Press the Right Soft key D
Center Select key [OK].
3. Select Automatic, Always Confirm
Select key [OK].
SENSITIVITY:
The Sensitivity setting controls how the voice recognition software determines when a
spoken word is a match. If you frequently experience the messages
No Match Found, adjust the sensitivity toward Reject Less. If you frequently experience
false activations (when the phone recognizes a name you didn't say), adjust the
sensitivity toward Most Sensitive.
1. Press the Center Select key [MENU], select
Center Select key [OK]. Select Tools, press the Center Select key [OK], select
Voice Commands
then press the Center Select key [OK].
2. Press the Right Soft key D
Center Select key [OK].
3. Select More Sensitive, Automatic, or
Select key [OK].
Adapt Voice:
Voice Commands are speaker independent, which means that no training or adaptation
is required. Some users with heavy accents or unusual voice characteristics may find
difficulty in achieving high accuracy with speaker independent Voice Commands, so
the Adapt Voice feature allows users to dramatically improve the recognition accuracy
through adaptation. Users who get acceptable recognition accuracy will find no
additional benefit to performing the Adapt Voice adaptation.
1. Press the Center Select key [MENU], select
Center Select key [OK]. Select Tools, press the Center Select key [OK], select
Voice Commands then press the Center Select key [OK].
2. Press the Right Soft key D
Center Select key [OK].
104
[Settings], select Confirm Choices and press the
or Never Confirm and press the Center
Please Repeat
Settings & Tools and press the
[Settings], select Sensitivity and press the
Less Sensitive and press the Center
Settings & Tools
and press the
Adapt Voice
[Settings], select and press the
3. Select Train Voice
To begin press the Center Select key [OK].
• Train Voice: Requires that you make recordings of your voice to customize the voice
recognitions system. It will take a few minutes.
4. Wait for the beep and then repeat the sentences using your normal tone of
voice.
5. Repeat steps 1 - 4 when you are finished with a full session, you will reach a
or
screen that reads
PROMPTS:
Allows you to select the Voice Commands system characteristics.
1. Press the Center Select key [MENU], select
Center Select key [OK]. Select Tools, press the Center Select key [OK], select
Voice Commands
2. Press the Right Soft key
Select key [OK].
3. Select Mode,
key [OK].
• Mode: Select the Voice Commands system mode from the following:
- Prompts: Read out Voice Commands prompts.
- Readout+Alerts: Read out and Alert tone prompts, dialing digits and
menus at the same time.
- Readout: Read out prompts, dialing digits and menus.
- Tones Only: Prompts you with a tone only.
• Audio Playback: Allows audio playback to play through the speakerphone
or through the earpiece. Select
the Center Select key [OK].
• Timeout: You can control how long the system listens for a command
before timing out. Select
Center Select key [OK].
and press the Center Select key [OK].
Adaptation Complete.
Settings & Tools
then press the Center Select key [OK].
D Prompts
[Settings], select
Audio Playback, or Timeout
and then press the Center Select
Speakerphone or
5 Seconds 10 Seconds
or
01
02 02
03
04
05
and press the
and press the Center
Earpiece and then press
and then press the
105