Casio GzOne Ravine 2 Guia Del Usuario página 52

TOOLS
USING VOICE COMMANDS
Your phone is equipped with an AVC (Advanced Voice Commands) feature. This feature
allows you to make calls or use the phone' s functions by simply using your voice. All you
have to do is talk into the phone and the phone will recognize your voice and complete
tasks by itself.
1. Press the Center Select key [MENU], select
Center Select key [OK]. Select
Select Voice Commands then press the Center Select key [OK].
Shortcut: With the flip open, press the Voice Commands key
phone to access Voice Commands.
2. The phone displays the Voice Commands
name of the command you want to use. To complete your task, simply follow
the voice prompts. You can speak the name of the command after you hear a
beep.
You can hear a beep in the Tone Only Mode (MENU
Settings > Voice Commands Settings
see a prompt without a beep sound in the Prompts,
3. Select either Call <Name or
<Item>, Contact <Name>, Redial,
Center Select key [OK].
4. When it recognizes one of these commands, the phone launches the
associated application. If the phone does not hear a command within
approximately eight seconds, AVC mode will turn itself off.
CALL <NAME OR #>:
Use the Call command to voice dial a name from your Contact List or a phone number.
When dialing a number, pronounce each digit, but do not pause noticeably between
the digits.
100
Settings & Tools and press the
Tools and press the Center Select key [OK].
O
on the left side of your
menu and prompts you to say the
> Settings & Tools > Phone
> Prompts > Mode > Tones Only) while you can
Readout + Alerts, or Readout.
#>, Send <MSG Type>, Go To <Menu>,
My Verizon or Help and press the
1. Press the Center Select key [MENU], select
Center Select key [OK]. Select Tools, press the Center Select key [OK], select
Voice Commands
2. You will hear
displayed.
3. If calling a contact from your list, say
to confirm the name you said. Say
number will be dialed. If there is more than one number saved for that contact,
you will be asked to confirm which number to dial.
Examples: - Call Tom Smith, - Call 617-555-1212, - Call Bob Carson' s mobile, -
Call Dee Harper at Home.
SEND <MSG TYPE>:
Use the Send
or number.
1. Press the Center Select key [MENU], select
Center Select key [OK]. Select Tools, press the Center Select key [OK], select
Voice Commands
2. You will hear
Check
displayed.
3. Say Send
Examples: - Send Text Tom Smith, - Send Picture to Dee Harper' s Mobile.
GO TO <MENU>:
Use the Go To
itself and be prompted to say the application name or you can skip the prompt by
saying Go To followed by the application name.
1. Press the Center Select key [MENU], select
Center Select key [OK]. Select Tools, press the Center Select key [OK], select
Voice Commands
Settings & Tools
then press the Center Select key [OK].
Please say a command and the Voice Commands
Call <Name>. Your phone will ask you
Yes
if it was repeated correctly. That phone
command to send a text or other type of message to a specified name
Settings & Tools
then press the Center Select key [OK].
Please say a command and the Voice Commands
followed immediately by one of Text, Picture,
command to open an application on your phone. You can say Go To by
Settings & Tools
then press the Center Select key [OK].
and press the
01
menu will be
02 02
03
04
05
and press the
menu will be
Video or Voice.
and press the
101