AGP SCS7 Instrucciones De Seguridad página 8

TO ADJUST THE DEPTH OF CUT
Loosen the Depth Stop Lever by pushing it forwards and adjust
the depth of cut to the desired amount. Then retighten the
Depth Stop Lever.
HOW TO USE THE SIGHTING NOTCH
To aid in free-hand cutting, sighting notches are located at the
front of the base plate.
VACUUM DUST COLLECTION
There is a vacuum port provided on the blade cover to collect
dust when operating.
Simply attach the vacuum cleaner hose to the vacuum port.
Keep the Cap in place when not in use.
WATER FEED SYSTEM
WARNING: This machine is equipped with a Portable Residual Current Device (PRCD) also known as a
Ground Fault Circuit Interrupter (GFCI). Always use this device whenever using the machine to reduce
the risk of shock hazards. Always position the device PRCD
as close as possible to the power source.
Test the PRCD device before each use.
Press the "Test" button to test. Press the "Reset" button to energize
the circuit to the machine.
GB
Depth Stop
Lever
Depth Scale
Sighting notches
Reset Button
8
Vacuum Port Cap
On Lamp
Test Button