Cleaning The Pre- Lter ( G.v) - Philips AC2887 Manual Del Usuario

Cleaning the pre- lter
( g.v)
Filter alert light
status
F0 displays on the
screen
1
Switch o the air puri er and
unplug from the wall outlet.
2
Pull the bottom part of the front
panel to remove it from the
appliance ( g.d).
3
Press the two clips down and pull
the pre- lter towards you ( g.e).
4
Wash the pre- lter under a running
tap. If the pre- lter is very dirty, use
a soft brush to brush away the dust
( g.w).
5
Air dry the pre- lter.
Note
• To optimize the lifetime of the pre-
lter, make sure it dries completely
after cleaning.
• Wash your hands after handling the
lter.
6
Put the pre- lter back into the
appliance ( g.g).
Note
• Make sure that the side with the two
clips is pointing towards you, and that
all hooks of the pre- lter are properly
attached to the puri er.
10 EN
Follow this
Clean the pre-
lter
7
To reattach the front panel, mount
the panel onto the top of the
appliance rst (1). Then, gently push
the panel against the body of the
appliance (2) ( g.h).
8
Touch and hold the reset button
for 3 seconds to reset the pre- lter
cleaning time ( g.x).