Bosch GLL 3-50 Instrucciones De Funcionamiento página 11

BM 2610A16273 07-13_BM 2610A16273 07-13 7/30/13 2:02 PM Page 11
22 Construction tripod BS 150*
23 Laser viewing glasses*
24 Positioning device WM 1*
25 Telescoping pole system BP350*
26 Laser receiver LR 2*
27 L-Boxx 2*
* The accessories illustrated or described are not included as
standard delivery.
Preparation
Always turn off the laser and the main power switch before
removing and replacing batteries.
Alkaline batteries are recommended for the tool.
Always replace all batteries at the same time. Use only batteries
from one brand and with identical capacity.
Remove the batteries from tool when not using for extended
periods. When storing for extended periods, the batteries can corrode
and discharge themselves.
When inserting, pay attention to the correct polarity according to
the representation of the inside battery lid.
It is the user's responsibility to periodically check the accuracy of
the laser tool as work progresses. Always check the accuracy of
the laser tool after it has been dropped or subject to extreme
temperature and temperature variations.
Assembly
To open the battery lid 8, pull latch 10 and fold the battery lid out. Insert
the batteries. When inserting, pay attention to the correct polarity
according to the representation on the outside of the battery lid.
When the battery indication 5 flashes red, the batteries must be replaced.
-11-