Parts Description; Functional Description - Makita RU03 Manual De Instrucciones

Cortador inalámbrico de pasto
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

PARTS DESCRIPTION

Parts description (with nylon cutting
head)
9
8
7
6
1
Switch trigger
3
Lock lever
5
Nylon cutting head
7
Wire guard
9
Front grip
11
Indication lamp
Parts description (with plastic blade)
10
9
8
7
1
Switch trigger
3
Blade holder
5
Protector
12
11
10
3
4
5
2
Battery cartridge
4
Protector
6
Nylon cord
8
Thumb nut
10
Hanger for shoulder
harness
12
Lock-off button
13
12
11
4
5
6
2
Battery cartridge
4
Lock lever
6
Plastic blade head
7
Plastic blade
9
Thumb nut
11
Hanger for shoulder
harness
13
Lock-off button
FUNCTIONAL
1
DESCRIPTION
2
WARNING:
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.
Failure to switch off and remove the battery cartridge
may result in serious personal injury from accidental
start-up.
Installing or removing battery
cartridge
CAUTION:
installing or removing of the battery cartridge.
CAUTION:
tridge firmly when installing or removing battery
cartridge. Failure to hold the tool and the battery
cartridge firmly may cause them to slip off your hands
and result in damage to the tool and battery cartridge
and a personal injury.
1
2
3
3
► 1. Red indicator 2. Button 3. Battery cartridge
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
upper side of the button, it is not locked completely.
CAUTION:
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the tool, causing injury to
you or someone around you.
CAUTION:
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
6 ENGLISH
8
Wire guard
10
Front grip
12
Indication lamp
-
Always be sure that the tool is
Always switch off the tool before
Hold the tool and the battery car-
Always install the battery cartridge
Do not install the battery cartridge
-
1
2
Tabla de contenido
loading

Tabla de contenido