Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operating instructions
3. SAFETY PRECAUTIONS.
PRO LIFTS S.L.
3.1 - The TE-086 is a machine designed to
elevate loads upwards in a vertical direction,
NEVER should it be used as a platform to
elevate people.
3.2 - Only place the lift on hard, flat surfaces
always checking that it is in a vertical position
by using the bubble level indicator (F) found
on the base section. Adjust the outrigger
stabilisers (Q) by turning the cranks to level
if necessary. NEVER use wedges or other
foreign objects to bring the lift to equilibrium.
3.3 - Check that the outriggers are placed
and set-up correctly using the pins safety
system.
3.4 - NEVER should the lift be used to
elevate a load that has not been properly
checked. It is necessary to verify that the
load is correctly supported and centred on
the appropriate lift support so that the weight
of the load will only elevate in a vertical
direction.
3.5 - The maximum load indicated on the
characteristics label and the instructions
Kgs
manual should not be exceeded
!
v11.02 - Depósito legal y Copyright 2011. Todos los derechos reservados.
ENGLISH
Tabla de contenido
