Technical Data; Environment; General Safety - Altrad Belle MEGAVIB+ Manual Del Operador

Model
Isolation Type
Housing
Power (kW)
Voltage (V)
Consumption in Load (A)
Speed with Load (rpm)
Vitesse en utilisation (rpm)
Weight (kg)
Application
Connection type to the motor
Connection type to the transmission
Level of acoustic power (dB(A))
Cable: Minimum Section (mm 2 )
Cable: Maximum Length (mts)
Safe Disposal
Instructions for the protection of the environment.
The machine contains valuable materials. Take the
discarded apparatus and accessories to the relevant
recycling facilities.
For your own personal protection and for the safety of those around you, please read and ensure you fully understand the following
safety information. It is the responsibility of the operator to ensure that he/she fully understands how to operate this equipment safely.
If you are unsure about the safe and correct use of the 'Megavib+', consult your supervisor or Belle Group.
CAUTION
Work Area
· KEEP your work area clean and well lit. Cluttered benches and dark areas invite accidents.
· DO NOT OPERATE power tools in explosive atmospheres, such as in the presence of À ammable liquids, gases, or dust.
Power tools create sparks wich may ignite the dust or fumes.
· KEEP bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.
Electrical Safety
· EARTHED TOOLS MUST BE PLUGGED INTO an outlet properly installed and grounded in accordance with all codes and ordinances.
· NEVER REMOVE the grounding prong or modify the plug in any away.
· DO NOT USE any adaptor plugs.
· CHECK with a quali¿ ed electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electri
cally malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.
· AVOID body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is grounded.
· DON'T EXPOSE power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
· DO NOT ABUSE the cord.
· NEVER USE the cord to carry the tool.
· NEVER PULL the plug from an outlet.
· KEEP cord away from heat, oil, sharp edges or moving parts.
· REPLACE damaged cords immediately. Damaged cords increase the risk of electric shock.
· WHEN OPERATING a power tool outside, use an outdoor extension cord marked "W-A" or "W". These cords are rated for
outdoor use and reduce the risk of electric shock.
Service
· Tool service MUST BE PERFORMED only by quali¿ ed repair personnel.
· When servicing a tool, USE only identical replacement parts.
· FOLLOW instructions in the Maintenance section of this manual.

Technical Data

Environment

General Safety

Improper maintenance can be hazardous. Read and Understand this section before you perform any
maintenance, service or repairs.
230v
Classe 2 double isolation
Plastic High Resistence
2
230 (50hZ)
7,5
To transmit the movement to an internal vibrator through a towline.
Hexagonal male of 10mm
Hexagonal female of 10mm
35
40
Component
Motor Housing
Internal Motor
Connectors
7
115v
1.6
115 (60hZ)
13
16,000
12,000
7
36
1,5
15
Material
Plastic
Copper and Aluminium
Steel
GB
GB
GB