Vortice VORT HR 350 AVEL Manual De Instrucciones página 35

ENGLISH
"Setting speed Menu" Page
From "Installer menu" page, you can select "Speed", in order to join to "Setting speed".
Pressing the [ ] key will display:
VSUP1
VEXH1
VSUP2
VEXH2
VSUP3
VEXH3
VSUP B
VEXH B
According to air-system required airflows, you can set the following motors speeds:
VSUP = (C) Fresh air intake from outside (see Fig. 3)
Default configurations are the same for both motors, as shown in the following table:
"Alarms" page
Access the "Alarms" page only if the machine detects one of the problems detailed below:
• Pre-alarm: Filters checking
• Alarm: Filters replacing
• Alarm: No Frost - Wait one hour
• Alarm: Ext probe damaged
• Alarm: Int probe damaged
• Alarm: Exh probe damaged
Alarm with machine lock: On the "HOME" page, are alternated shown the words "Alarm " And "Block ".
Alarm without locking the machine: On the "HOME" page, is shown the word "Alarm ".
In case of alarms: From the "Main Menu" page, choose the "Alarms" row and press the [ ] key.
A new descriptive page shows the specific alarm text and troubleshooting instructions.
Warning:
After 2 minutes with no keys being pressed, the display returns to the "Home" page without saving any changes.
SPEED
VSUP1 = speed 1
VSUP2 = speed 2
VSUP3 = speed 3
VSUP BOOST = boost speed
USE MENU
ALARM
SETUP
INFO
[ ▲ ]
VEXH = (D) Stale air outlet to outside (see Fig. 3)
without blocking the machine;
without blocking the machine;
occurs with the machine lock;
without blocking the machine (No Frost, By-pass: not enabled);
without blocking the machine ("By-pass" not enabled);
without blocking the machine (No Frost not enabled);
MAIN MENU
VEXH1
040
VEXH1 = speed 1
VEXH2 = speed 2
VEXH3 = speed 3
VEXH BOOST = boost speed
[ ▲ ]
[ ]
[ ▲ ]
35