FAR RAC 181 Instrucciones De Uso página 19

RAC 181
Suction always ON (pic. f6-f7-f8-f9-f10)
From the "ON" position, with the supplied pin (N), push the selector (D) towards the inside of the riveting tool, as in the picture (pic.
f6). Press and hold the lever (G) and, at the same time , push in the locking device (M) (pic. f7-f8). To return to the controlled suction
press the locking device (M) on the opposite side (pic. f9).
When the nail container (C) is full, do not operate the riveter, unscrew the container (C) and empty it (pic. f10).
WARNING: When the riveting tool is used in the absence of nails tank (C), it is essential to fit the baffle (T) and the relative reduction
(S) (pic. F12), in order to avoid injury to the operator and / or persons close to him.
f6
D
f7
N
G
Revisione - 01
PLEASE DISPOSE OF NAILS CAREFULLY!
N
Date 04-2017
GB
f8
M
f9
N
f10
N
M
C
19