Mobicool S25 DC/AC Instrucciones De Uso página 10

_S25_X25_30_DC-AC.book Seite 10 Montag, 28. April 2008 3:29 15
Operation
I Note
If the handle is folded back of if the cooler is being carried, the lid
is locked. You can only open the lid when the handle is folded for-
wards.
I
Note
Like every cooling device, your cooler must be properly ventilated
so that any heat created can dissipate. Otherwise proper function-
ing cannot be ensured.
➤ Place the cooler on a firm base.
➤ Connect the 12 V connection cable (2 1, page 4) into the cigarette light-
er socket or a 12 V socket in the vehicle
or
➤ Plug the 220-240 V connection cable (2 2, page 4) into the AC voltage
socket and connect it to the 220-240 V AC mains supply.
Switch off the battery monitor (3 2, page 4, ABS accessory) (OFF
position).
➤ Only on versions with the additional heating feature: Push the switch
(3 3, page 4) on the control panel to "COLD" or "HOT" to switch on the
cooler.
I
Note
Close the box tightly by pushing down the lid.
✓ The indicators on the control panel show you the operating mode:
Operating display
Green (4 1, page 4)
Red (4 2, page 4)
✓ The cooler starts cooling/heating the interior
a
Caution!
Ensure that the objects placed in the cooler are suitable for cooling
to the selected temperature.
➤ If you wish to switch the cooler off:
– Slide the switch (4 3, page 4) to the "OFF" position (only with the
heating accessory)
– Pull out the connection cable
10
S25 DC/AC, X25 DC/AC, X30 DC/AC
Operating mode
Cooling
Heating