Orbegozo BC 4000 Manual De Instrucciones página 9

BC 4000
Using the protector splash
To attach the protector splash to your BBQ Grill, position it on
the hotplate so that the slots in the shield are resting securely
over the ribs at either end of the hotplate, as shown in figure 1.
The protector splash simply lifts off for easy cleaning and
storage.
CARE AND CLEANING
Do not leave plastic utensils in contact with hotplate while
cooking. Do not use sharp objects or cut food on top of the BBQ
Grill. When cleaning the non-stick coating do not use metal or other abrasive scourers. After cleaning, dry
the BBQ Grill and tray thoroughly with a soft cloth before storing. Always turn the power off and remove the
plug from the power point before cleaning. Remove the thermostat from the socket of the BBQ Grill. If
cleaning of thermostat is necessary, wipe over with a damp cloth. Do not immerse the thermostat in water or
any other liquid. Store the thermostat carefully in a safe place. Do not knock or drop it as this can damage
the thermostat.
The heat element in the hotplate is totally sealed, so it is safe to fully immerse in water. Wash the hotplate,
tray and protector splash in warm soapy water using a mild household detergent and a soft washing sponge.
A bottle brush may be used to clean between the hotplate grill bars.
The base can be wiped over with a damp cloth or washed in warm soapy water using a mild household
detergent and a soft washing sponge. Do not place the base in a dishwasher. Do not use abrasive or metal
scourers as they may scratch the base.
STORAGE
Always dry and assemble the BBQ Grill before storing. Ensure the tray and hotplate are correctly positioned.
Store the assembled BBQ Grill on a flat surface on your bench top or cupboard.
Important: Before inserting thermostat into socket, ensure the interior of it is fully dry. To do this, wipe
interior of socket with a dry cloth or shake out excess water vigorously.
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old
household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old
appliances must be collected separately in order to optimize the recovery and recycling of the materials they
contain, and reduce the impact on human health and the environment. The crossed out "wheeled bin" symbol
on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of their old
appliance.
DECLARATION OF CONFORMITY:
This device complies with the requirements of the Low Voltage Directive 2006/95/EC and the requirements
of the EMC directive 2004/108/EC.
9