Zodiac MX 8 Instrucciones De Montaje página 14

Prepare the Pool
1. Manually vacuum the pool, and make sure the pool filter and pump basket are clean.
2. Close the pool main drain line.
3. Aim the return line fittings downwards.
Assemble the Hose
The hose uses easy twist-lock connectors. Push and twist the connector on each hose section until they
lock into position with a clicking sound. The hose cuffs have three (3) connection positions. Any of the
three (3) positions are sufficient for an air-tight seal.
1. Connect enough hoses to reach the farthest point from the skimmer or vacuum point you are using
and then add one more section of hose. If your pool length is greater than 11m , you can purchase
additional hoses. Contact your retailer.
2. Position the hose float on the first hose section, about 0,2 m from the cleaner head
(1 section = 1 meter) from the cleaner head.
3. Twist lock the quick connector onto the end of the hose, the furthest from the skimmer or vac point.
14 14
Installation
Skimmer or
Dedicated Suction
Cleaner Line
Hose Float about 0,2 m
from Cleaner Head
Quick Connector
+ robot
1 Hose
Section
Hose Float about 0,2 m
from Cleaner Head
Skimmer or
Dedicated Suction
Cleaner Line
1 Hose
Section
Quick Connector
+ robot