- After disinfection shake the accessories vigorously and place them on a paper towel, or alterna-
tively, dry them with a jet of hot air (e.g. using a hair dryer).
- Dispose of the solution as recommended by the disinfectant manufacturer.
After the CLEANING AND / OR DISINFECTION operations dry the area of the transducer, without
exerting unnecessary pressure on the transducer itself, dry the accessories and the outside of the
appliance with a paper towel or even better with a jet of hot air (e.g. hair dryer). Finally, check that
the "power plug" area of the device is completely dry.
SPARE PARTS
Description
- Extension tube
- Mouthpiece and Nasal prong
- PVC adult mask
- PVC child mask
SYMBOLS
Class II unit
Important: check the operating instructions
Type BF applied part
Direct current
Hazard: electrocution.
Consequence: Death.
Do not use the unit
while bathing or showering.
Enclosure protection rating: IP21.
IP21
(Protected against solid bodies over 12 mm. Protected against access
with a finger; Protected against vertically falling water drops.)
CE Medical Marking ref. Dir. 93/42 EEC
and subsequent amendments
0051
Complies with: EN 60601-1-11
Manufacturer
In compliance with European standard
EN 10993-1 Biological evaluation of medical devices and
93/42/EEC Medical Devices Directive"
PHTHALATES
FREE
Serial number of the device
Power supply unit for home use
Safety transformer
with cut-out
Thermofuse
Approvals
Plug for very low safety voltage
Compliant with Directives
Important:
check the operating instructions
Alternate current
14
Code
ACO104T
ACO252P
ACO90
ACO242