FLAEM Universal Plus Manual De Instrucciones página 11

Ocultar thumbs Ver también para Universal Plus:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
oxide.
• Keep the power unit away from any liquid substance.
• Do not expose the device to high temperatures.
• Do not put the device and power adaptor near heat sources, direct sunlight, or in hot environments.
• The power unit provided has been specifically designed for use with the unit. Never use the power unit with
other appliances or for uses other than those indicated in this manual and never use with other power units.
• Never use adapters for mains voltages different from those shown on the power supply unit (plate details).
• Always keep the power supply and power cord away from heated surfaces.
• Do not handle the unit with wet hands. Do not use the device in humid environments (e.g. while taking a
bath or shower). Do not immerse the device in water; should this accidentally occur, unplug the device im-
mediately. Do not remove or touch the device immersed in water before pulling out the plug. Take the device
immediately to an authorized service center or to your local dealer.
• Repairs must be performed by authorized personnel only. Any unauthorized repairs will void the warranty
and may pose a safety hazard for the user.
WARNING: Do not modify this equipment without authorization of the manufacturer.
• The Manufacturer, the Retailer and the Importer are responsible for the safety, reliability and performance of
the device only if: a) the device is used in accordance with the operating instructions b) the electrical system
of the premises where the device is used is in compliance with current laws.
• The manufacturer should be contacted for reporting problems and/or unexpected events related to device
operation.
OPERATING INSTRUCTIONS
Before each use, the nebuliser and accessories should be cleaned
according to the instructions in the section "SANITIZATION AND
DISINFECTION". A personal use of the nebuliser and its accessories
is recommended in order to avoid any risks of infection.
1. Remove the upper part (A3) from the unit body (fig. 1)
2. Insert the medication dose (max 6 ml) in the relevant tray (if a syringe
is used, remove the needle) (fig. 2); The medication is best diluted to at
least 4 ml using saline solution to optimise nebulisation.
11
fig. 1
fig. 2
Tabla de contenido
loading

Tabla de contenido