3. Reinsert the unit upper part and connect the nebulizer to the power
mains using the special power unit as indicated in figure 3.
4. Sit comfortably, holding the nebulizer in your hands, place the mouth-
piece (B) over your mouth or use the nasal prong (C) or mask (D) or (E)
(fig. 4).
While using the nasal prong (C) we recommend breathing in strongly
to prevent the formation of condensation which would prevent correct
nebulisation.
5. To give the dose of medicine to the patient while he/she is lying
down (fig. 5), use the extension tube (F), one end of which must
be connected to the mask (D) or (E) while the other must be
connected to the appliance suitably housed in the special table
stand (I).
6. Press the ON/OFF button for a moment (fig. 6); the nebulizer led (A2)
will show a steady green light and the nebulised medication will start
to come out.
fig. 5
12
fig. 3
fig. 4
fig. 6