Radio Interference; Microwave Cooking Principles; Grounding Instructions - Orbegozo MIG 2037 Manual De Instrucciones

MIG 2037
Operation of the microwave oven can cause interference to your radio, TV, or similar equipment.
When there is interference, it may be reduced or eliminated by taking the following measures:
1. Clean door and sealing surface of the oven.
2. Reorient the receiving antenna of radio or television.
3. Relocate the microwave oven with respect to the receiver.
4. Move the microwave oven away from the receiver.
5. Plug the microwave oven into a different outlet so that microwave oven and receiver are on different
branch circuits.
1. Arrange food carefully. Place thickest areas towards outside of dish.
2. Watch cooking time. Cook for the shortest amount of time indicated and add more as needed. Food
severely overcooked can smoke or ignite.
3. Cover foods while cooking. Covers prevent spattering and help foods to cook evenly.
4. Turn foods over once during microwave cooking to speed cooking of such foods as chicken and
hamburgers. Large items like roasts must be turned over at least once.
5. Rearrange foods such as meatballs halfway through cooking both from top to bottom and from the
center of the dish to the outside.
This appliance must be grounded. This oven is equipped with a cord having a grounding wire with a
grounding plug. It must be plugged into a wall receptacle that is properly installed and grounded. In the
event of an electrical short circuit, grounding reduces risk of electric shock by providing an escape wire for
the electric current. It is recommended that a separate circuit serving only the oven be provided. Using a
high voltage is dangerous and may result in a fire or other accident causing oven damage.
WARNING Improper use of the grounding plug can result in a risk of electric shock.
Model
Supply
Power input (microwave)
Power output (microwave)
Power input (grill)
Turntable diameter
Capacity
Outter dimensions (LxWxH)
Net Weight

RADIO INTERFERENCE

MICROWAVE COOKING PRINCIPLES

GROUNDING INSTRUCTIONS

MIG 2037
230 V ~ 50 Hz
1250 W
800 W
1000 W
Ø 245 mm
20 L
595x343,5x388 mm
15 Kg
26