GIESSE VARIA SLIM RADIO Manual De Uso página 41

For fixing onto PVC window frames: self-threading screws for metal Ø4.8 (6
◆
pieces).
Equipment and tools: measuring tape, pencil, drill/screwdriver, set of drill heads
◆
for metal, insert for screwing in, electricians pliers, screwdrivers.
14.2. Assembly with outward opening window.
Aside the drawing of specific application using
accessories provided. For different mountings,
please contact manufacturer.
A. Pencil in an "X" over the centre line of the window
frame (Fig. 2).
B. Select the correct form of brackets (Fig. 3).
C. Attach the template to the window frame (fixed part)
and line axis up with the centre line "X" traced earlier
(Fig. 4). Warning: for window frames not on the
same plane, cut the part of the template coloured in
grey and fix this to the moveable part of the window
frame, taking care to keep it in the same position.
D. Bore holes in the window frame at the points
indicated on the template (Fig. 5).
E. Assemble the two brackets with the distancer (to
help position correctly. Once it has served its
purpose it can be removed). Mount the supports
onto the frame with the appropriate screws provided.
Check that everything is aligned both horizontally
and vertically.
F. Mount the bracket for outward opening windows onto
the moveable part of the frame in accordance with
the markings indicated on the template.
G. Complete assembly of the chain terminal with the
safety clip inserted onto the pin Ø4x32 (provided) in
median position (see fig. 6).
H. Mount the actuator onto the brackets by inserting the
two openings at each side onto the corresponding
pins on the brackets.
I. Rotate the actuator 90°, bring the chain terminal up
to the bracket and insert the pin into the opening on
the bracket. Insert the safety clip into the bracket.
J. Check that the exit on the chain is perfectly aligned
with the bracket. If the chain is not aligned with the
bracket, loosen the fixing screws and reposition the
bracket correctly.
K. Check all electrical connections with the diagram on
the label attached to the lead and and in conformity
to indications on chapter 9 – Electrical connection.
L. Carry out a complete check of opening and closure
41
Outward application
Figure 2
Figure 3
Figure 4
Figure 5